[giaban]CALL FOR PRICE[/giaban]


[mota]

  • It does not alter the drinkability of the water.
  • Resists pressure and backpressure.
  • Crystallization system in a porous system, ideal for waterproofing supports with the continuous moisture in thick layers
  • Moisten the support before its application.
  • Always treat singular points (angles, corners, ...) with waterproofing strips or with half rods made with weberep hormiplus neo or weberep hormitec express .
  • Can be applied by brush or trowel.
  • Application thickness: minimum 10 mm in two layers (5 to 10 mm per layer).
  • Waiting time between coats: 3 hours.
  • Waiting time to coat: 4 days.
  • Waiting time for immersion in water: 4 days.
  • For successful curing, the plaster should be moistened once a day for four days after application.
  • On busy soils, the mortar must be protected.
  • To ensure waterproofing there must be a minimum of 10 mm thickness at any point of the application

[/mota]

[availability] IN STOCK [/availability]

[varieties]  Restrictions:

  • Application temperatures between 5 and 35 ºC.
  • Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
  • Do not apply on surfaces with permanent humidity or with capillary rise.
  • Do not apply on surfaces subject to possible movements, it does not resist cracking of the support.

  [/varieties]

[chitiet]

WEBERTEC IMPER G


Thick layer mineral waterproofing. 
Mineral mortar specially designed for the realization of regularization and waterproofing plasters in thick layers on surfaces that require a greater application thickness, on floors, walls, or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, pits elevator, tunnels, foundations, as well as concrete retaining walls.

PACKAGE: 25KG
[/chitiet]



-->